Ceramics, Cermets, Composites

Description

ceramics-calorymetry

Ceramic materials (technical or refractory) are inorganic and non-metallic. Usually they are shaped from the “green body” at room temperature and acquire their typical properties during a sintering process at high temperatures. Thermogravimetry andcalorimetry are perfect tools for complete characterization and understanding of ceramics materials.
Together with DTA and dilatometry, sintering processes can be studied and optimized.

SETARAM offers specially designed systems for measuring.
Phase transition, heat capacity, thermal conductivity, sintering behavior, thermal expansion coefficient, shrinkage behavior are parameters of major importance that can be studied with our systems.

Some International References
Air Liquide – France
CEA Saclay – France
CTTC – France
ENSCI Limoges – France
SNECMA – France
THALES R&D – France
MINES Paris Tech
BAM (Bundesanstalt für Materialprüfung) – Germany
HERAEUS – Singapore
Cambridge University – UK

Associated products

Large volume & high temperature DTA / DSC (ambient to 2000°C)

96-LINE-TG-300dpi

96 Line DTA / DSC

The requirements of different experiments are sometimes contradictory, e.g. low sample mass is needed for good transition detection, high sample mass for accurate determination of heat capacity; analysis may need constant or variable temperature; use of the crucible may be open or closed. Two...

Read more »

Large volume & high temperature Thermogravimetric Analyzer TGA (ambient to 2000°C)

96-LINE-TG-300dpi

96 Line TGA

This is an extremely high performance weighing module used with the TGA 96. This balance can weigh samples up to 100 g and is well suited to measuring both micro-quantities of samples (a few milligrams) as well as large, dense samples, while maintaining measurement...

Read more »

Large volume & high temperature simultaneous TGA & DSC / DTA (ambient to 2000°C)

96-LINE-TG-300dpi

96 Line TGA – DTA / DSC

This is an extremely high performance weighing module used with the TGA 96. This balance can weigh samples up to 100 g and is well suited to measuring both micro-quantities of samples (a few milligrams) as well as large, dense samples...

Read more »

Large-volume & high-temperature ThermoMechanical Analyzer TMA (ambient to 2000°C)

96-LINE-TG-300dpi

96 Line TMA

The TMA 96 has a vertical configuration that permits working under very low loads (from 2 g) without subjecting the sample to stress. The displacement sensor of the TMA 96 is both robust and highly accurate. It detects very low variations of displacement on large samples....

Read more »

An-easy-to-use Differential Scanning Calorimeter DSC (-170 to 700°C) with a 3-year warranty

DSC131-300dpi

DSC131 evo

The HIGHLIGHTS – Robustness: the DSC131 evo features a highly robust sensor that, if needed, can readily be changed by the user in less than 30 minutes. No other DSC offers such flexibility. – Ease of operation: dedicated market leading CALISTO software that...

Read more »

Documentation

Brochures
Application notes
Articles See articles