Minerals

Description

mineral-calorymetry

General thermal characterization of minerals (clays, feldspars, gypsum, …) is necessary to understand their structure or change of structure with time and structure. It can for example lead to key information for the understanding of the formation of geological layers.
Valorisation of widely available minerals also often require thermal processes that need to be understood and optimized thanks to thermal analysis data (ex: in the cement industry).

The effect of minerals in the field of oil or natural gas extraction is also of key interest, especially in the oil shale or shale gas activities or in the carbon dioxide sequestration field.
SETARAM instruments offer outstanding possibilities for the study of crystal structure, phase changes, valorisation, fossil fuel extraction, CO2 sequestration.

Some International References
IFP – France
CMTR CNRS – France
JRC (Joint Research Centre / European Comission) – Germany
TU Bergakademie Freiberg – Germany
TU Clausthal – Germany

Associated products

TGA, from ambient to 1150°C or 1600°C

Labsys 3-4

LABSYS evo TGA

LABSYS evo is a user friendly, robust and highly powerful thermal analysis platform. HIGHLIGHTS include: • A comprehensive line of thermal analyzers with two temperature ranges chosen and optimized for distinct families of application: – RT – 1 150 °C, a cost effective solution mostly (but not only)...

Read more »

TGA, and Simultaneous TGA-DTA, TGA-DSC from ambient to 1150°C or 1600°C

Labsys 3-4

LABSYS evo STA

LABSYS evo is a user friendly, robust and highly powerful thermal analysis platform. HIGHLIGHTS include: • A comprehensive line of thermal analyzers with two temperature ranges chosen and optimized for distinct families of application: – RT – 1 150 °C, a cost effective solution...

Read more »

Large volume & high temperature TGA/STA-EGA (ambient to 2000°C)

96-LINE-TG-300dpi

96 Line TGA/STA-EGA

This is an extremely high performance weighing module used with the TGA 96. This balance can weigh samples up to 100 g and is well suited to measuring both micro-quantities of samples (a few milligrams) as well as large, dense samples while maintaining measurement resolution to...

Read more »

High-performance simultaneous TGA & DTA / DSC (ambient / 2400°C) with Evolved Gas Analysis

SETSYS-Evolution-closed

SETSYS Evolution TGA/STA-EGA

  The HIGHLIGHTS SETSYS Evolution is the standard for high performance TGA, TG-DSC and TG-DTA application.  It is based on a complete modular thermal analysis platform for – TGA, DTA and DSC – Simultaneous TGA/DTA and TGA/DSC – The key to...

Read more »

TGA-EGA and Simultaneous STA-EGA, from ambient to 1150°C or 1600°C

Labsys 3-4

LABSYS evo TGA/STA-EGA

THE HIGHLIGHTS Simplicity of use: thanks to both an ergonomic design and the dedicated market leading Calisto software, LABSYS evo is user friendly and intuitive to operate – LABSYS evo offers a “Plug & play” gas analyzer coupling device,enabling simultaneous MS, FTIR or GC/MS connections....

Read more »

High Temperature 3D Calvet Calorimeter (up to 800 / 1000°C)

AlexSys-Calorimeter

AlexSys

Sensitivity, stability, flexibility and precision: The AlexSys calorimeter features a 3D Calvet sensor, providing high sensitivity and exceptional precision. The calorimeter block and furnace design ensures a high signal-to-noise ratio,temperature and signal stability, and low detection limit permitting low energy and slow reactions to be...

Read more »

Very High Sensitivity Isothermal Calorimeter (ambient to 200°C)

MS80-Calorimeter-Setaram2

MS80

The MS80 calorimeter has the greatest sensitivity in the Calvet 3D calorimeter range. It is It is mostly used in isotherm mode, between ambient temperature and + 200°C, and is intended for measurements of very low thermal effects: self-discharge of batteries, self-decomposition of powders, heat generation of...

Read more »

High-performance modular DTA & DSC thermal analyzers (ambient / 2400°C)

SETSYS-Evolution-closed

SETSYS Evolution DTA/DSC

The HIGHLIGHTS SETSYS Evolution is the standard for high performance TGA, TG-DSC and TG-DTA application.  It is based on a complete modular thermal analysis platform for – TGA, DTA and DSC – Simultaneous TGA/DTA and TGA/DSC – Dilatometry / TMA The key to the SETSYS...

Read more »

High-performance modular Thermogravimetric Analyzer TGA (ambient / 2400°C)

SETSYS-Evolution-closed

SETSYS Evolution TGA

The HIGHLIGHTS SETSYS Evolution is the standard for high performance TGA, TG-DSC and TG-DTA application.  It is based on a complete modular thermal analysis platform for – TGA, DTA and DSC – Simultaneous TGA/DTA and TGA/DSC – Dilatometry / TMA The key to the SETSYS TGA-DTA / DSC...

Read more »

High-performance modular simultaneous TGA & DTA / DSC thermal analyzer (ambient / 2400°C)

SETSYS-Evolution-closed

SETSYS Evolution TGA-DTA/DSC

SETSYS Evolution is the standard for high performance TGA, TG-DSC and TG-DTA application.  It is based on a complete modular thermal analysis platform for – TGA, DTA and DSC – Simultaneous TGA/DTA and TGA/DSC – Dilatometry / TMA The key to the...

Read more »

Documentation

Brochures
Application notes
Articles See articles