Metals & Alloys

Description

jet-engine-turbine-blades-close-up

With its high-sensitivity and high-temperature (up to 2400°C) thermal analyzers, SETARAM offers a wide range of systems that are specially designed for R & D on metals and alloys. Additional accessories and systems allow thermal measurements in special atmospheres (oxidative, damp, corrosive, etc.).

Our thermal analysis are essential tools as they allow access to:
– Data on thermodynamics and kinetics, including temperature and heat of melting and crystallisation, heat capacity, expansion coefficient, etc.
– Stability and resistance in relation to temperature, atmosphere, etc.: oxidation, reduction, corrosion, etc.

Thermal Analysis also allows simulation of processes (sintering, for instance) and measurement of heat of dissolution.

Some References

ICMMO – France
Chimie Paris Tech
CEA Saclay – France
Air Liquide – France
MInES ParisTech – France

Associated products

TGA, from ambient to 1150°C or 1600°C

Labsys 3-4

LABSYS evo TGA

LABSYS evo is a user friendly, robust and highly powerful thermal analysis platform. HIGHLIGHTS include: • A comprehensive line of thermal analyzers with two temperature ranges chosen and optimized for distinct families of application: – RT – 1 150 °C, a cost effective solution mostly (but not only)...

Read more »

DTA, DSC from ambient to 1150°C or 1600°C

Labsys 3-4

LABSYS evo DTA/DSC

LABSYS evo is a user friendly, robust and highly powerful thermal analysis platform. HIGHLIGHTS include: • A comprehensive line of thermal analyzers with two temperature ranges chosen and optimized for distinct families of application: – RT – 1 150 °C, a cost effective solution mostly (but not...

Read more »

TGA, and Simultaneous TGA-DTA, TGA-DSC from ambient to 1150°C or 1600°C

Labsys 3-4

LABSYS evo STA

LABSYS evo is a user friendly, robust and highly powerful thermal analysis platform. HIGHLIGHTS include: • A comprehensive line of thermal analyzers with two temperature ranges chosen and optimized for distinct families of application: – RT – 1 150 °C, a cost effective solution...

Read more »

Horizontal dilatometer (room temperature / 1200°C)

C-therm dilatometer

C-Therm Dilatometer

  The HIGHLIGHTS: C-Therm dilatometers offer high resolution and stability across a broad measurement range. With unparalleled ease-of-use, high adaptability, and modular design, C-Therm dilatometers offer researchers a robust cost-effective solution to their characterization needs.   See also: SETSYS Evolution TMA, TCi

Large volume & high temperature TGA/STA-EGA (ambient to 2000°C)

96-LINE-TG-300dpi

96 Line TGA/STA-EGA

This is an extremely high performance weighing module used with the TGA 96. This balance can weigh samples up to 100 g and is well suited to measuring both micro-quantities of samples (a few milligrams) as well as large, dense samples while maintaining measurement resolution to...

Read more »

High-performance simultaneous TGA & DTA / DSC (ambient / 2400°C) with Evolved Gas Analysis

SETSYS-Evolution-closed

SETSYS Evolution TGA/STA-EGA

  The HIGHLIGHTS SETSYS Evolution is the standard for high performance TGA, TG-DSC and TG-DTA application.  It is based on a complete modular thermal analysis platform for – TGA, DTA and DSC – Simultaneous TGA/DTA and TGA/DSC – The key to...

Read more »

TGA-EGA and Simultaneous STA-EGA, from ambient to 1150°C or 1600°C

Labsys 3-4

LABSYS evo TGA/STA-EGA

THE HIGHLIGHTS Simplicity of use: thanks to both an ergonomic design and the dedicated market leading Calisto software, LABSYS evo is user friendly and intuitive to operate – LABSYS evo offers a “Plug & play” gas analyzer coupling device,enabling simultaneous MS, FTIR or GC/MS connections....

Read more »

An innovative line of Thermal Analyzers (-120 / 830°C) with 3D-Inside technology: TG-DSC-EGA

SENSYS_evo_TG-DSC

SENSYS evo TG-DSC-EGA

  The HIGHLIGHTS Thermogravimetry Excellent TG signal baseline: the symmetry of the microbalance, with its sample and reference suspended vertically from the beam guarantee reproducible positioning of the sample over time and excellent stability of the TG signal baseline. Automatic compensation of...

Read more »

Controlled Humidity Generator

Wetsys

Wetsys

A dry gas and a humidity–saturated gas are mixed in order to produce a gaseous flow with a controlled and stable humidity rate of ±0.3% RH, at a given temperature. Programming is done by EURTOHERM devices that incorporate the humidity and temperature measurement of gas flow and their precise control, permitting the...

Read more »

Unique automated Quality/Control instrument for determination of σs for ferromagnetic compounds

sigmametrenew

Sigmameter

The sigmameter is designed to measure the specific saturation magnetization (σs) of a material. This parameter characterizes a ferromagnetic phase and is, in principle, independent of the structure and shape of the sample. When a ferromagnetic compound is placed in a magnetic field it...

Read more »

Documentation

Brochures
Application notes
Articles See articles