SETSYS Evolution DTA up to 2400°C
Highly-sensitive DTA transducers are available:
• A unique tricouple transducer, featuring three thermocouples for the sample and reference sites resulting in unsurpassed sensitivity and resolution; in addition, the detector's symmetry guarantees excellent baseline stability.
• Plate transducer for very-high temperature measurements (up to 2400°C).
• Protected transducer if corrosive gas emanates from the sample
SETSYS Evolution DSC up to 1600°C
The DSC plate transducer offers an alternative to use of DTA rods.
when a quantitative measurement is desired. It is designed to provide the highest sensitivity over the full temperature range.
Up to 1750°C, platinum, alumina and zirconia crucibles are
proposed for tricouple and protected transducers. Three volumes of crucible (20, 100 and 300 mm
3) are available for different masses of sample to be analyzed or thermal effect to be measured. For limited-temperature use (up to 500°C), aluminum crucibles with lids are appropriate for the study of controlled
dehydration.
The DSC plate rod requires the use of flat-bottomed alumina or platinum crucibles. For high temperature or special measurements, tungsten or graphite crucibles with covers are available.
See also:
SETSYS Evolution DTA/DSCSETSYS Evolution TGA
SETSYS Evolution TGA-DTA/DSC
SETSYS Evolution TGA-gas analysis couplings
SETSYS Evolution TMA
