Setaram instrumentation, calorimetry and thermal analysis specialist

  Search :    
SETARAM WORLDWIDE NETWORK

   
HOME >3D SENSOR INSIDE
 

BENEFITS OF "3D SENSOR INSIDE" TECHNOLOGY

 
"3D-Sensor Inside" technology is the very latest development of Tian-Calvet calorimetric transducers.

   
   
   

Incomparable precision of measurement

The three-dimensional geometry confers unequalled precision of measurement on the DSCtransducer.
Both the sample and the reference are completely surrounded by a flux meter, which means that the entire differential heat flux associated with the studied transformation or reaction can be measured.
 

Absolute calibration

With a three-dimensional transducer the sensitivity of the DSC or calorimeter is independent of :
• the weight, form and nature (powder, fibre, liquid, etc.) of the sample,
• any contact between the sample and the transducer,
• the type of crucible used,
• the nature of the sweeping gas (inert, oxidizing, reducing, wet) and its flow rate.
The DSC or Calorimeter is calibrated using a very accurate electrical method (Joule effect) that is automated and applicable at any temperature, including sub-ambient temperatures, and to any type of thermal profile (heating, cooling, isothermal).

 

An appreciable saving of time

• in daily work, as the calibration does not require systematic verification
• when determining the heat capacity by direct measurement of the Cp without additional tests on a reference sample.

 
 

SETARAM’s DSC and Calorimeters equipped with the exclusive "3D-Sensor Inside" Technology :

MHTC 96
Large-volume, High-Temperature DSC and (drop) calorimeter (ambient to 1600°C)

microDSC7 evo
High-sensitivity DSC and microcalorimetry (-45 to 120°C)

LVC-M3013
High Sensitivity Multi-cells air bath Calorimeter for Non Destructive Assay of 3013 containers

LVC-270-3W
High Sensitivity Large Volume 15 Liters Calorimeter for Non Destructive Assay

LVC-270-15W
High Sensitivity Large Volume 15 Liters Calorimeter for Non Destructive Assay

LVC-580
High Sensitivity Large Volume 25 Liters Tritium Calorimeter for Non Destructive Assay

LVC-390
High Sensitivity Large Volume 60 Liters Tritium Calorimeter for Non Destructive Assay

LVC-680
High Sensitivity Large Volume 90 Liters Tritium Calorimeter for Non Destructive Assay

HP Micro DSC
Mastering High Pressure DSC & Microcalorimetry up to 1000 bars - 14,500 psi

C80
Reaction, isothermal and scanning calorimeter (ambient to 300°C)

BT 2.15
Low Temperature Calorimeter (from -196°C to 200°C)

LABSYS evo
TGA, DTA, DSC and Simultaneous TGA-DTA, TGA-DSC from ambient to 1600°C

microDSC3 evo
High-sensitivity DSC and isothermal microcalorimetry (-20 to 120°C) with in-situ mixing possibilities

SENSYS evo DSC
An innovative line of Thermal Analyzers (-120 / 830°C) with 3D-Inside technology: DSC, High Pressure DSC, Robot DSC, TG - DSC - coupling to gas analyzer

SENSYS evo TG-DSC
An innovative line of Thermal Analyzers (-120 / 830°C) with 3D-Inside technology: DSC, High Pressure DSC, Robot DSC, TG-DSC-coupling to gas analyzer

LVC-3013
High Sensitivity air bath Calorimeter for Non Destructive Assay of 3013 containers

MS80
Very High Sensitivity Isothermal Calorimeter (ambient to 200°C)

HT1000
High temperature calorimeter (ambient to 1000°C)

AlexSys
High Temperature Calvet Calorimeter (up to 800 / 1000°C)

transparent
transparent Agenda
transparent
separateur_bas
transparent Partners
Akts
C-THERM
HEL
ACL Instruments
VISIT THE WEBSITE OF OUR NEW SUBSIDIARY
OUR NEW SUBSIDIARY
SITE MAP | LEGAL | CONTACT US   -  English | Français | 中文版本 | Россия | 日本語